Reset Key For Epson Sx 130.rar
How to Reset Your Epson SX 130 Printer with a Simple RAR File
If you own an Epson SX 130 printer, you may encounter a problem that prevents you from printing. This problem is caused by the waste ink counter, which keeps track of how much ink is used by the printer. When the waste ink counter reaches a certain limit, the printer will stop working and display an error message such as "The printer's ink pads are at the end of their service life" or "A printer's ink pad is at the end of its service life. Please contact Epson Support". This is a safety measure to prevent ink from overflowing and damaging the printer or your desk.
However, this does not mean that your printer is broken or that you need to replace the ink pads. You can easily reset the waste ink counter and continue using your printer with a simple tool called WIC Reset Utility. WIC Reset Utility is a software that can reset the waste ink counter of many Epson printers, including the Epson SX 130. All you need is a reset key, which is a code that you enter in the WIC Reset Utility to perform the reset.
Download: https://tinurli.com/2w4sqF
You can buy a reset key online from various sources or get a free trial reset key that will reset your waste ink counter to 80% one time only. Once you have the WIC Reset Utility and the reset key, follow these steps to reset your Epson SX130 printer:
Download WIC Reset Utility from here and install it on your computer.
Connect your Epson SX 130 printer to your computer with a USB cable and turn it on.
Open WIC Reset Utility and select your printer model from the drop-down menu.
Click on "Read waste counters" to check the current status of your waste ink counter. You will see a percentage that indicates how full the waste ink counter is.
If the percentage is above 100%, you need to reset the waste ink counter. Click on "Reset waste counters" and enter your reset key in the box that appears. Click on "OK" to confirm.
The WIC Reset Utility will reset your waste ink counter and display a message that says "Waste counters have been resetted". Click on "OK" to close the message.
Turn off your printer and disconnect it from your computer. Wait for a few seconds and then turn it on again.
Your printer should now work normally and print without any error messages.
Congratulations! You have successfully reset your Epson SX 130 printer with WIC Reset Utility and a reset key. You can now enjoy printing without worrying about the waste ink counter. However, you should keep in mind that resetting the waste ink counter does not clean or replace the ink pads. The ink pads may still be saturated with ink and may leak over time. Therefore, you should periodically check the condition of the ink pads and replace them if necessary. You can also use an external waste ink tank to collect the excess ink and prevent it from spilling inside or outside the printer.
We hope this article was helpful and informative for you. If you have any questions or comments, please feel free to leave them below. Thank you for reading!